Wincore Nixdorf Printer Configuration

6 Apr 2014

Social:

INTERFACE TYPE:                           RS232 BAUD RATE:                  9600 DATABITS:                    8 STOPBITS:                    1 PARITY:                        OFF PROTOCOL:                  XON/XOFF CENTRONICS:                ECP   EMULATION EMUL. TYPE 1:               PROPRINTER XL 24 TOP OF FORM POS:        10/60 TYPEFACE:                             DATA QUALITY CHAR. – DENSITY:          PROPORTIONAL CHAR. – WIDTH:            NORMAL WIDTH COUNTRY:                    U.S.A CR:                              CR=CR LF:                               LF=LF LEFT EDGE:                  0 REF – EDGE:                  LEFT FEEDER:                       OFF MULTI PART:                 OFF EMUL. TYPE 2:               PROPRINTER XL 24 CONTINUOUS PRINT:      On LOW NOISE:                  OFF

SERVICE ALIGNMENT:                  -1 ADJUST VERTICAL:         -3 ADJUST HORIZONTAL:      1 FEED MODE:                   NORMAL INTERFACE MENU:           ON EMULATION MENU:          ON MEMORY EXTENSION:       OFF SCS:                               0 PROPRINTER XL 24 TOP OF FORM POS.:          0/60 TYPE FACE:            DATA QUALITY CHAR. – DENSITY:            17.1 CPI CR:                                CR=CR LF:                                 LF=LF LEFT EDGE:                     0/60 BOTTOM EDGE:               0/60 PAGE LENGTH:                12 ZOLL LINE LENGTH:                 80

Note:All content is copyrighted to www.vsolution.in and may not be reproduced on other websites.

If you have any question regarding this websites or any other post related you can Email us.

Post Category : HowToGuide